Shenzhen Silvercnc Tech Co., Ltd.
Shenzhen Silvercnc Tech Co., Ltd.
Add to Cart
CNC touch probe for Tool length measurement and break detection
The tool setting instrument are a high-precision switch (probe), a hard alloy tetrahedron (probe) with high hardness and wear resistance (probe), and a signal transmission connector (other parts omitted).The tetrahedral probe is used to contact the tool and transmit the force to the high-precision switch through the flexible support rod installed under it.The on and off signals sent by the switch are transmitted to the CNC system for tool direction identification, calculation, compensation, access and so on through the signal transmission connector.
Tool setter function
1. It is used to measure the toool length,wear and break of CNC machine tools.
2. Alarm will be given in case of over travel to prevent accidents.
3. Shorten the measuring time of tools and improve the running time of machine tools.
4. Save manpower and prevent unqualified products.
Features
1. As the signal is output by directly contacting the leading edge of the tool, it does not cause false positives and has high
reliability.
2. The internal switch is of the contact type with high precision (repeatability: 1 μm), and is free of movement differential.
3. Since there is no need of an amplifier, there is no temperature drift caused by self-generation and temperature
characteristic of the sensor unit.
4. Dustproof and waterproof structure has superior durability even under harsh conditions caused by the presence of coolant
and cuttings.
5. Outputs over-travel warning signal.
Product parameters
| Product name | MK-T24E-40 |
| Contact diameter | Ø40mm |
| Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide |
| Contact structure | NC (Normally open) |
| Pretravel | 0.5mm |
| Stroke | 12mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) |
| Contact life time | 3 million |
| Protective structure | IP67 |
| Contact force | 2.5N (Installation position: Vertical) |
| Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| LED lamp | Default : LED OFF / Operating : LED ON |
| Over travel signal (built-in microswitch) | |
| Output mode | NC normally closed (an emergency stop when the signal broken ) |
| Contact rating | DC24V 20 mA resistive load |
Product dimessions
Product detail