Shenzhen Silvercnc Tech Co., Ltd.
Shenzhen Silvercnc Tech Co., Ltd.
Add to Cart
5 Axis Turning Milling Composite Vertical Machining Center KMC400
Optimal Spindle support
1. Using vertical coordinate classic structure, have better spindle stiffness
2. Two-arm CNCrotary swing workbench support
3. Y-axis using four guide way supports. Driver located in the center
4. Annular tool magazine and bed of machine constructed together-simple construction, space saving
Product Feature
1. Wide base design with three sets of precision linear roller ways and 5 sliding block on X and Y axes, and two sets of precision linear roller ways and 6 sliding blocks on Z aixs. The machines are suitable for both rough and finish machining because of high rigidity, precision and stability.
2. Ball screw's driving end equipped with 4 precision angular contact ball bearings and the other end with 3 ones, ball screw pre-extended.
3. Spindle supported by 5 precision angular contact ball bearings. With good rigidity for cutting.
4. Turning area can be supplied with full coolant.
Product Parameters
| Item | Technical parameter | KMC400 V | KMC400 U | KMC400 UMT(With turning) |
| Working range | Maximum swing diamete mm | — | Φ50 | Φ50 |
| Workbench diameter mm | 690x400 | Φ450, 370x370 ▲ | Φ450, 370x370 ▲ | |
| Maximum product weight Kg | 1000 | 500 | 500 | |
| Route | X/Y7Z-axis motion quantity mm | 350/ 350 / 340 | 350/ 350 / 340 | 350/350/340 |
| A-axis rotation range | — | -130°~+130° | -130°~+130° | |
| C-axis rotation range | — | unlimited | unlimited | |
| Tool spindle | Maximum torque S1 / S6 Nm | 42/62 5.6/10 ▲ | 42/62 5.6/10▲ | 42/62 5.6/10 ▲ |
| Maximum Rpm rpm | 15000 20000▲ | 15000 20000▲ | 15000 20000▲ | |
| Rated power kw | 16 7.5 ▲ | 16 7.5 ▲ | 15.5 7.5 ▲ | |
| Clamp | HSK-A63 HSK-A50▲ | HSK-A63 HSK-A50 ▲ BT30▲ | HSK-A63 HSK-A50▲ | |
| Spindle central water discharge | Unsupported, supported ▲ | Unsupported, supported ▲ | Unsupported, supported ▲ | |
| Spindle-directing | supported | supported | supported | |
| Positioning lock | Unsupported | Unsupported | supported | |
| A-axis drive | A-axis drive mode | — | Direct drive torque motor | Direct drive torque motor |
| A-axis drive torqueS 1 / S6 Nm | — | 689/ 1250 (single drive) | 689 / 1250 (single drive) | |
| C-axis drive | C-axis drive mode | — | Direct drive torque motor | Direct drive torque motor |
| C-axis drive torqueS 1 / S6 Nm | — | 341 / 582 | 341 / 580 | |
| Maximum Feeding speed | X-axis/ Y-axis/ Z-axis m / min | 48,60▲ | 48,60▲ | 48,60▲ |
| A-axis rpm | — | 30 | 30 | |
| C-axis rpm | — | 80 | 600 | |
| Control resolution | X/Y/Z-axis mm | 0.001,0.0001 ▲ | 0.001,0.0001 ▲ | 0.001,0.0001 ▲ |
| C-axis | — | 0.001°,0.0001°▲ | 0.001°,0.0001°▲ | |
| Full close-loop control | X/Y/Z-axis | Standard | Standard | Standard |
| A-axis/C-axis | — | Standard | Standard | |
| Positioning accuracy | X/Y/Z-axis mm | 0.008,0.005 ▲ | 0.008,0.005 ▲ | 0.008,0.005 ▲ |
| A-axis/C-axis mm | — | 8", 5" ▲ | 8", 5" ▲ | |
| Repeated positioning accuracy | X/Y/Z-axis mm | 0.005,0.003 ▲ | 0.005,0.003▲ | 0.005,0.003 ▲ |
| A-axis/C-axis | — | 5", 3"▲ | 5", 3"▲ | |
| Tool Magazine | Capacity | 22 | 22 | 22 |
| Maximum tool diameter mm | Φ63 | Φ63 | Φ63 | |
| Maximum tool length mm | 230 | 230 | 230 | |
| Maximum tool weight kg | 6 | 6 | 6 | |
| Attachment ▲ | Wireless probe mm | repeated accuracy±0.003 | repeated accuracy±0.003 | repeated accuracy±0.003 |
| Automatic q-setter mm | repeated accuracy±0.003 | repeated accuracy±0.003 | repeated accuracy±0.003 | |
| Machine weight | Net weight | about 5 tons | about 6 tons | about 6 tons |
| CNC System | Supplier | KEDE Numerical Control Co., LTD | ||
| Type | GNC62 Bus mode CNC system | |||
| HMI | 15inches,191inches | |||
Proudct application
